Pro Audio
Hyper Active
2000™
Hyper Active Line Source
1080™
Line Source 300™
Compact 500W Line
Array™
Wireless/Cordless Hyper Active™
Wireless
Hyper Active™
Mini Wireless
Hyper Active™
Wireless
Transmitter / Receiver™
HyperActive Mixer
BT™
Mixer +
Digital Player™
Hyper
MIDI Controller
Channel 2™
Channel 4™
Mini™
3-Way Speakers
Mike 4™
Personal PA™
Instrument Microphones
Wireless
Headphone
|
|
DA Series Digital Power
Amplifier
Features
-
DA series is the
real power amplifiers that can input digital signals directly
into it, which is the essential equipment in the digital audio
transmission system.
-
Wide voltage
range, Stable and dependable performance
65% ~ 130% the extra wide working voltage range design against
the relative rated Input supply voltage , so it can easlily cope
with the strong voltage fluctuation environment.Meanwhile, power
volume gradient circuit more considered the audience feelings.
Advanced SMT technology make the performance more stable.
-
Precise and
pure quality and wonderful SNR
Finally, several experiments to eliminate the sound defaults are
paid. Consequently, precision and clearity of DA series are
remarkable. Let alone the ultra-low distortion and super S/N R.
-
Work under
long term low-load is available
Work under 2Ωload long and stably is available
-
Designed for
the applications of professional equipments, theatres and live
amplifying
The handy 2U-cabinet that makes setting and carrying easier can
be fixed on any parts of the rack. The perfect protection
circuit makes its self-protected characteristics are as splendid
as the aircraft carrier’s.
-
Totally
intelligent dynamic limiter system and distortion eliminate
circuit
The circuit which power is controlled by dynamic limiter is a
patent, assuring the system is working in a permanent safe
situation.
-
Patent of
earthed technology
The latest patent of earthed technology that is adapted by the
DA is able to work without floating switch and minimize the
noise no matter what kind the connection is.
-
Always
pursuit of the best
The DA that have been studied for years are the optimum products
with elaborated performances which is proved by the
sophisticated interior layout.
Specifications
Mode |
DA8350 |
DA8550 |
DA8750 |
Rated Output Power
Continuous Average Power RMS,1KHz,THD≤1% |
|
|
|
Bridge @ 4Ω |
1×1400W |
1×2000W |
1×2600W |
Bridge @ 8Ω |
1×1084W |
1×1700W |
1×2324W |
Bridge @ 16Ω |
1×700W |
1×1100W |
1×1500W |
Stereo @ 2Ω |
2×700W |
2×1000W |
2×1300W |
Stereo @ 4Ω |
2×542W |
2×850W |
2×1162W |
Stereo @ 8Ω |
2×350W |
2×550W |
2×750W |
Frequency
Response 8Ω load,10dB below rated power |
20Hz~20KHz±0.25dB |
THD+N(typical) 20Hz~20KHz,8Ω
load,10dB below rated power |
<0.05% |
Intermodulation Distortion SMPTE(typical) 8Ω load, 10dB
below rated power, 60Hz+7KHz |
<0.05% |
Signal to Noise Ratio
20Hz~20KHz,8Ω load,A-weighted |
>105dB |
Input
CMRR(common mode rejection ratio) @ 1KHz |
>80dB |
Channel
separation(Crosstalk) @ 1KHz |
>80dB |
Damping
Factor 8Ω load, 1KHz and below |
>450 |
>500 |
>600 |
Circuitry |
Bipolar,ClassAB |
Input
Impedance |
Analog input:20kΩ balance input
Digital optical input AES3:110Ω Digital coaxial input
RCA:75Ω |
Slew Rate |
45V/μs |
55V/μs |
60V/μs |
Processor |
44.1k Hz/48k Hz/96k Hz/192k Hz
sampling frequency can convert to 96KHz sampling frequency
,24-bit D/A automatically |
Voltage Gain rated power @8Ω |
37dB |
39.5dB |
41dB |
Input
Sensitivity Rated Power @ 8Ω |
0dBu(0.775Vrms) |
Maximum Input Level |
+22.0dBu(10.0Vrms) |
Protection
Circuits |
Soft-start,inrush-current
limitation,temperature monitoring of heat-sinks and
transformer,output short protection, output DC
protection,output over current
protection,protector,turn-on/off muting,RF protection |
Dynamic Limiter |
Intelligent |
Cooling |
Four Variable-speed DC
fans,front-to-rear air flow |
LED
Indicators Front panel |
Power-ON,Mode,Clip/Limit,Signal,Protection |
LED
Indicators Rear panel |
N.A. |
Input Connectors |
Analog:3-pin
XLR,male and female per channel,pin 2=inphase(hot); Digital
signal:3-pin XLR,female and coaxial RCA& Optical AES3 |
Output
Connectors |
three 4-pole SPEAKON connectors,
both channels and bridge mode outpu;Digital signal:3-pin
XLR,male and coaxial RCA& Optical AES3 |
Modes of Operation |
Stereo,Mono,Bridge |
Power
Consumption 1/8 rated output power @ 4Ω |
285W |
411W |
560W |
Power Consumption 1/3 rated
output power @ 4Ω |
762W |
1092W |
1493W |
Protector
|
240V/230V:F15A 120V/100V:F25A |
Power Supply |
240V,230V,120V
or 100V;50Hz/60Hz(factory configured) |
The height
of Unit |
2U |
Product Dimension (WXDXH) |
482X475X88mm
|
Net Weight |
17.5kg |
18.3kg |
19.8kg |
Shipping Dimension (WXDXH) |
623×653×215mm/0.0875m3 |
Gross
Weight |
18.7kg |
21.31kg |
22.3kg |
Back to Pro Audio Product
Page
|